Rudder and Hull
Finally got to sneak off from work a little early after trying to do that all week. Decided that the rudder would take way too much sanding so took a few thin passes with the planer to get down towards the resin, should be good to epoxy coat after a bit of sanding now, once the bottom is rebuilt. Looks a bit like a crazy piece of modern art right now
Kept going with the hull blisters, almost done, and we mixed up a little epoxy putty and testing techniques for filling them, which looks like it should be a fairly straightforward job.
And helped Kevin finish off the canoe repair, which is looking good and a nice test of fibreglassing skills.